|
Dear Doctor,
Have you considered selecting a PROCERA®
restoration? PROCERA® , as you may know provides your patient with natural beauty, maximum
strength and a precise fit.
I have made a list of common "Questions and
Answers" that I would like to share with you. Look for the free
offers in this letter.
If I prescribe a Procera®
AllCeram restoration, is a
special tooth preparation necessary?
A chamfer type of preparation is preferred. It is also advisable
to round off all angles and sharp edges. This is because the stylus
used to map and digitize the dies cannot "read" sharp
angles. Sharp angles may also jeopardize the integrity of the crown.
Am I required to use any special burs or instruments?
We advise clinicians to continue to use the diamonds and carbides they are
using now for routine crown preparations. Procera®
has a prep kit
available featuring different sized diamonds that might be helpful in achieving
the optimum prep for Procera® . We will provide a free kit
with the completion of your first Procera®
case. It is very important
to remember that clinicians must use a diamond with generous water spray
should any coping adjustment be necessary. This includes adjustments
made to the occlusal surface of the finished restoration.
What cement do you recommend for Procera®
AllCeram?
One of the compelling reasons for using Procera®
is that you can continue to
use whichever cement you are now using in your office for routine crown and
bridge treatment (following the manufacturers recommendations). The
coping has a very high flexural strength. 3M™ RelyX is recommended. Ask
us for a Free RelyX kit, with the completion of your first
Procera® case.
How has Procera®
been accepted in the dental industry?
Dr. Gordon J. Christensen said it best in the video tape; Procera®-A
Challenge To Porcelain Fused To Metal "Clinical success has been
demonstrated with Procera® over
several years". Tape is available on loan.
Pass the word on about PROCERA®
! A practice builder like we have never seen before.
Please watch your case boxes for More "Questions AND Answers"
about Procera® .
Sincerely
Jeff Wilkinson, CDT
C&B/ Porcelain Supervisor
Request
a copy of this document.
Return To Top
|